I tested 13 Nintendo Switch 2 cases and these are the best

You might find it kind of sad to put a hard-earned gadget into a protective case. To me, it’s freeing. Using a case relieves me of the worry that it will accumulate tons of little scratches. So, I wasted no time testing cases on the new Nintendo Switch 2, and it didn’t take long for me to find one that I think is the best.

I tried several types of cases on the Switch 2. I tested flimsy shells that snap or slide onto the Switch 2 to provide a simple, aesthetically pleasing barrier from scratches to the console and its Joy-Cons. I also tried slim cases that have one job: to protect the console when it isn’t in use.

I just listed my high standards for form-fitting cases made to fit the Switch 2 while it’s in use. However, the bar for slim zip-up/clasp cases is lower. They just need to protect the console and, ideally, provide some extra value, like a pocket for cables, cartridge storage, or both, ideally.

As for my favorite case, I didn’t want to make any major compromises; I wanted one that’s just as good for handheld mode as when docked, which is why I think the Dbrand Killswitch is the best model overall. I published a full review of the Killswitch, but the skinny is that while it’s perhaps more expensive than some may hope to pay, the level of protection and versatility it offers is worth the cost.

The best Switch 2 case for both handheld and docked play

The least expensive Killswitch tier costs $59.95 and includes a rear cover for the console and a small piece to adhere to its kickstand for a matching style, plus Joy-Con 2 grips, all of which securely latch onto each component. It also includes a skin for your hardware. There’s no piece of the Killswitch that feels like it’ll incidentally wiggle off.

Unfortunately, the Switch 2 console case makes it impossible to fit into the dock. However, Dbrand includes its workaround adapter that fits into it, essentially acting as a USB-C extender. It’s a fairly elegant solution that works as intended. The only downside is that it leaves your Switch 2’s screen exposed instead of concealed by the dock’s plastic wall. It’s a little clunky, but I’m willing to forgive it because it allows the Switch 2 to retain its docking functionality.

The tier I recommend for most Switch 2 players (especially those who will often throw their console into a bag) is the $79.85 “Travel” tier, which includes a semi-transparent travel cover that protects the front of your console during transit, or just for safekeeping when you aren’t using it. The cover fits around the front of your Killswitch-equipped console, securing around the back with a tough bungee cord latch. This tier also includes a pair of analog stick grips and a tray that holds 10 Switch cartridges and fits neatly within the travel cover.

When this post originally went live, Dbrand was in the midst of updating its Killswitch so that it wouldn’t allow the Joy-Con 2s’ magnets to break away without pressing their release buttons. Basically, if you held your Killswitch-equipped Switch 2 parallel to the ground solely by either of the Joy-Con 2 controllers and give it a shake, the entire console portion was likely to detach, potentially causing serious damage to the console. Dbrand redesigned the Joy-Con 2 grips to fix the issue, and previous buyers can request a replacement free of charge. Future buyers will receive the Killswitch with the updated, improved grips.

Genki’s Attack Vector case is similar in some ways to the Killswitch, as it consists of three pieces: one that goes around the console, and two pieces that wrap around each of the Joy-Con 2 controllers. The $49.99 kit improves on the Killswitch with swappable modular grips that come in three sizes to let you customize how the Joy-Con 2 fits in your hand. It follows a small, medium, and large model, with the smallest adding some minor ergonomic benefits, and the largest being what large-handed folks will likely gravitate toward to make the Switch 2 comfier to hold. Its large, palm-filling grip feels as good to use as the Killswitch, but it’s a very close race and I’d be smitten to use either.

However, one notable downside with the Attack Vector is that the Joy-Con 2 sleeves can be pulled off with relative ease, unlike Dbrand’s. Their fit is accurate, technically, and they won’t fall off during normal use. But they’re not as secure as I want them to be.

Also, Genki advertises that you can keep the Attack Vector on when you insert your console into the Switch 2 dock, but its launch unit doesn’t work as intended. Genki addressed complaints on forums that the case doesn’t fit the console perfectly, and the fixed model is on its way to me at the time of this update. It will ship a replacement middle piece to all who have already purchased the case, and those who buy the case going forward will receive the fixed product.

The best slim, protective Switch 2 cases

Tomtoc’s FancyCase Slim case has recently become my favorite Switch 2 zip-up case. Starting at around $33 and going up to $39 depending on the style that suits you best, it’s not the most affordable option. But it’s worth the cost if you want better protection than either the PowerA or Belkin cases below can provide. It has less give in its middle section by comparison. Another thing that sets it apart are the bulbous sections on the outer cover, which offer more vertical clearance above the Joy-Con 2’s analog sticks, ensuring they don’t get pressed while your console’s inside. Oh, and it makes color schemes that look like ice cream sandwiches.

The FancyCase Slim case is the best option I’ve tried not just for durability but also for a dash of style. That said, it’s short on other perks to justify the price, in case that matters to you. While Belkin’s case features a pocket for storing microSD Express cards, a cable, or any other small trinket like an AirTag to track its location, the only thing inside of this one is what you get in almost any zip-up case: a soft screen-protecting layer that can hold 12 Switch cartridges.

Power A’s slim zip-up case for the Switch 2 is a simple and inexpensive way to keep your console safe when you aren’t using it. It’s not a hard case, so it won’t survive catastrophic damage, but it’s a fine choice if you don’t want to add a bunch of heft. To that end, it’s one of the slimmest cases that I have tried.

At just $19.99 (half the cost of Nintendo’s official carrying case), baseline protection alone would be sufficient, but it offers safe storage for up to 10 Switch cartridges, too. The cartridge holder has a soft bottom that protects the screen, and it can also fold into a tent, allowing the Switch 2 to rest against it (the Switch 2 already has a kickstand for this).

This case doesn’t suffer from a negative trait that’s common among other slim cases (some of which are pricier than PowerA’s): being able to press on the Joy-Con 2 joysticks from the outside. Other cases might allow your Switch 2 to suffer some joystick damage unbeknownst to you, but not this one, as well as the others included in this section.

For $10 more ($29.99), Belkin’s slim case is better-looking than PowerA’s and is made with better materials. It has a carrying strap, a large mesh pocket, and a secret compartment for an Apple AirTag or similar Bluetooth tracker, all of which the PowerA case lacks. Belkin’s case can carry 12 cartridges, and it’s only slightly thicker than the PowerA case, likely to compensate for whatever cables or small gizmos you might stuff into its pocket. It features deep grooves to fit the Joy-Con 2’s triggers, and its outer shell it tough enough to prevent most accidental presses on the joysticks. It comes in dark gray, cream, and a fun green shade.

Belkin sells a $69.99 version of its slim case that features everything above and includes a 10,000mAh 20W battery for keeping the Switch 2 charged while it’s inside the case. The company says the battery can fully charge the console 1.5 times. The battery results in a thicker case, and its bespoke compartment only holds the specific Belkin model that’s included, so you won’t be able to swap in a different, faster-charging battery. Neither of those may be deal-breakers for you, but are worth keeping in mind.

JSAUX makes a relatively slim zip-up Switch 2 case that absolutely pops with color. Expressiveness is its main appeal, as this $25.99 case slouches on other features you might want. Once it’s opened, all there is to see is a velcro strap that secures your Switch 2. Underneath it is a fabric tray stitched into the case that can hold 12 game cartridges. Like the Belkin and PowerA cases, this one prevents accidental pressing on the Joy-Con 2 sticks through its shell. It’s a little too light on features to recommend broadly, and it’s thicker than the other models.

Genki’s $42.99 Sleeper Case is a very tough soft case. Its wool-wrapped shell doesn’t have nearly as much give as other slim cases. Plus, its screen guard can carry up to 18 cartridges. However, I dislike how much the Switch 2 moves around when you shake the case (the fit is snug if you have the company’s Attack Vector case equipped). Notably, Genki’s Neil Trachy, who handles marketing and media relations, shared with The Verge that a production error may impact how well its zipper works in the long run, and that a free fix is coming in late July for all who’ve already purchased one (the updated case is on its way to me at the time of this update for testing). The fix will be implemented for all future purchasers of the case.

“Our Sleeper Case was upgraded to a waterproof zipper last minute and unbeknownst to our production team, the adhesives used were not binding well to the zipper. […] While the case is still rock solid, the weak point will be the glue that holds it all in place.”

The best form-fitting shells for the Switch 2 in handheld mode

The Killswitch is the best case for handheld mode because it allows you to remove the Joy-Con 2 controllers and includes an adapter to easily connect to the dock. Plus, it offers kickstand access.

If you don’t ever plan to connect your Switch 2 to its dock or detach its Joy-Cons, or it’ll be a rare occurrence, you might pick an all-in-one shell that fits completely around the console. It will protect every angle of your Switch 2 from dings and scratches, and may even keep it safe in the event of a drop.

The $29.99 Spigen Rugged Armor is a suitable option. It fits around every nook and port of the Switch 2, with openings for its speakers and air intake. It gets bonus points for fitting around the edges of the Joy-Con 2 while providing more pronounced grips, which may be a boon for those who experience hand or wrist pain while holding the console in handheld mode. However, as noted, you’ll need to remove the case in order to install the Switch 2 into its original dock.

The JSAUX Split Protective Case

This case features many of the qualities that I like about the Dbrand Killswitch for a lot less ($29.99 versus $59.99), even one-upping it by being able to fit into the Switch 2’s original dock without the need for an adapter. I look forward to testing it when it launches.

Update, August 4th: Adjusted pricing details as necessary. Added the Tomtoc FancyCase Slim case to this guide, and mentioned that Genki’s updated Attack Vector and Sleeper Case are on their way to me for testing.